maux
Star on GitHub Buy me a coffee

Get maux

One bootable disk image with the system, the tools, the compilers and the manual.

Download maux-1.0.po

32 MB (33,554,432 bytes). SHA-256 2fa8e7fb49b4c5d6a9c689ac92842e2e64c6c358325703e5a471d262b3a7a75c.

Each release also has SHA256SUMS and a source archive.

Try it in your browser

Boots this disk in Apple2TS, an Apple II emulator in your browser. Type at a human pace: it is a IIe keyboard.

Try now in your browser

Run it

In an emulator

mame apple2ee -aux rw3 -sl7 a2sd -hard maux-VERSION.po

That sets up an enhanced IIe with a RamWorks III and the disk on an AppleIISd card. Add a Mouse or Mockingboard card for the 60 Hz clock tick; you supply the Apple ROMs.

On an Apple IIe

You need an enhanced IIe, a RamWorks-style card with at least 1,024 KB, and a SmartPort card that can present a 32 MB volume (an SD or CompactFlash adapter). Write the disk to the card's media byte for byte, for example dd if=maux-VERSION.po of=/dev/rdiskN bs=1m, then boot from that slot. Nobody has run it on real hardware yet.

Quick start

  1. Boot. You land at the shell prompt.
  2. Run ls /bin to see the commands, and ps to see the processes.
  3. Run man man to learn the manual; q leaves it.
  4. Next, Learn to write a program, or Watch it run.

Requirements

Or an emulator: MAME, or Apple2TS in your browser.

Optional

Limits

Single user, no memory protection, no network stack and no C compiler. Only emulator runs are on record so far.

Source and licence

The code is MIT licensed. The source is in the project repository. Manual pages derived from V7 and BSD keep their own notices; see About.